Anisotropic, Hyperelastic Material
Jump to navigation
Jump to search
Constitutive Law
This MPM material is an anisotropic hyperelastic material for dry woven fabrics in forming simulations. This material is only suitable for membrane particles defining a 2D fabric plane in 3D simulations. The fabric modeling and meaning of material properties are found in Refs [1].
Material Properties
These properties can be determined by various fabric tests.
| Property | Description | Units | Default |
|---|---|---|---|
| THETA0 | Initial orientation angle | degrees | 0 |
| Eyarn | Equivalent elastic modulus of the fabric | pressure units | 0 |
| nu | Equivalent elastic modulus of the fabric | none | 0 |
| T10 T11 T12 T13 T14 |
Traction interpolation coefficient in direction 1 | pressure units | 0 |
| T20 T21 T22 T23 T24 |
Traction interpolation coefficient in direction 2 | pressure units | 0 |
| SH0 SH1 SH2 SH3 SH4 SH5 SH6 SH7 SH8 SH9 SH10 SH11 SH12 |
Shearing Interpolation coefficient in the 1-2 plane | pressure units | 0 |
History Variables
This material uses four history variable:
- J or the determinant of the deformation and equal to V/V0.
- Theta 12 history
- l 1 history
- l 2 history
Examples
References
- ↑ P. Boisse, N.Hamila, F. Helenon, Y. Aimene, and T. Mabrouki, "Draping of Textile Composite Reinforcements: Continuous and Discrete Approaches," Advanced Composites Letters, 16(4) (2019).