Transversely Isotropic Viscoelastic Material

Constitutive Law

(This material is available only in OSParticulas because it is still in development)

This anisotropic MPM material is a small strain, linear viscoelastic material that extends the Viscoelastic Material to model anisotropic viscoelasticity.

The stress (σ) and strain (ε) are related by:

      [math]\displaystyle{ \sigma(t) = \mathbf{C}(t) * \varepsilon(t) }[/math]

Here [math]\displaystyle{ * }[/math] indicates convolution (or Boltzman's superposition) between time-dependent stiffness tensor ([math]\displaystyle{ \mathbf{C}(t) }[/math]) and strain tensor. In Voight-notation with unique axis in the z direction, the time-dependent stiffness tensor is

      [math]\displaystyle{ \mathbf{C}(t) = \left[\begin{array}{cccccc} K_T(t)+G_T(t) & K_T(t)-G_T(t) & \ell(t) & 0 & 0 & 0 \\ K_T(t)-G_T(t) & K_T+G_T & \ell(t) & 0 & 0 & 0 \\ \ell(t) & \ell(t) & n(t) & 0 & 0 & 0 \\ 0 & 0 & 0 & G_A(t) & 0 & 0 \\ 0 & 0 & 0 & 0 & G_A(t) & 0 \\ 0 & 0 & 0 & 0 & 0 & G_T(t) \end{array}\right] }[/math]

Here [math]\displaystyle{ K_T(t) }[/math] is the plane strain, bulk modulus, [math]\displaystyle{ G_T(t) }[/math] is the transverse shear modulus, [math]\displaystyle{ G_A(t) }[/math] is the axial shear modulus, and [math]\displaystyle{ n(t) }[/math] and [math]\displaystyle{ \ell(t) }[/math] give time-dependence of the C₁₁ and C₁₂=C₁₃ elements of the stiffness matrix (as defined here). The time dependence of each property is modeled with a sum of exponentials:

      [math]\displaystyle{ K_T(t) = K_{T0} + \sum_{k=1}^{N_{KT}} K_{Tk} e^{-t/\tau_{KT,k}} }[/math]

      [math]\displaystyle{ G_T(t) = G_{T0} + \sum_{k=1}^{N_{GT}} G_{Tk} e^{-t/\tau_{GT,k}} }[/math]

      [math]\displaystyle{ G_A(t) = G_{A0} + \sum_{k=1}^{N_{GA}} G_{Ak} e^{-t/\tau_{GA,k}} }[/math]

      [math]\displaystyle{ n(t) = n_0 + \sum_{k=1}^{N_n} n_k e^{-t/\tau_{n,k}} }[/math]

      [math]\displaystyle{ \ell(t) = \ell_0 + \sum_{k=1}^{N_\ell} \ell_k e^{-t/\tau_{\ell,k}} }[/math]

TIViscoelastic 1 and 2

TIViscoelastic 1 and TIViscoelastic 2 give identical materials but with different initial orientations. TIViscoelastic 1 has the unrotated axial direction along the z (or θ if axisymmetric) axis while TIViscoelastic 2 has unrotated axial direction along the y (or Z if axisymmetric) axis. You can change the unrotated direction to any other orientation when defining material points by selecting rotation angles. For 2D analyses, the two options allow for axial direction in the x-y (or R-Z if axisymmetric) analysis plane (TIViscoelastic 2) or normal to that plane (TIViscoelastic 1). For 3D analyses, only TIViscoelastic 1 is allowed (and it in the only one needed).

Elastic Fiber Direction

Some materials, such as unidirectional composite materials or wood, can be modeled with the fiber direction as the axial direction. Because this direction is typically much stiffer than the isotropic plane direction, it might be expected to have little or no viscoelasticity compared to other directions. If one assumes that axial modulus ([math]\displaystyle{ E_A }[/math]) and Poisson's ratio ([math]\displaystyle{ \nu_A }[/math]) re independent of time, then [math]\displaystyle{ n(t) }[/math] and [math]\displaystyle{ \ell(t) }[/math] are determined by [math]\displaystyle{ K_T(t) }[/math] by setting:

      [math]\displaystyle{ N_n=N_\ell=N_{KT}, \quad \tau_{n,k}=\tau_{\ell,k}=\tau_{KT,k}, \quad n_0 = E_A + 4K_{T0}\nu_A^2, \quad n_k = 4K_{Tk}\nu_A^2, \quad \ell_0 = 2K_{T0}\nu_A, \quad \ell_k = 2K_{Tk}\nu_A }[/math]

Material Properties

The unusual task for this material is to use multiple Gk and tauk properties (all with the same property name) to enter a material with multiple relaxation times.

Property	Description	Units	Default
GT0 (or G0)	The long term (or fully-relaxed) transverse shear modulus (can be entered as G0 to be compatible with isotropic viscoelastic material properties)	pressure units	0
GA0	The long term (or fully-relaxed) axial shear modulus	pressure units	0
KT0	The long term (or fully-relaxed) plane-strain bulk modulus	pressure units	0
en0	The long term (or fully-relaxed) C11 element of the stiffness tensor	pressure units	0
ell0	The long term (or fully-relaxed) C12=C13 elements of the stiffness tensor	pressure units	0
ntaus	The number of relaxation times of the previous long-term property that was entered. This property is only needed in XML files and must come before any subsequent Pk or tauk properties. In scripted files, the number is automatically determined from the number of relaxation times you provide.	none	none
Pk	The next property in series for the previous long-term property that was entered. Use multiple Pk for each term on the series.	pressure units	none
tauk	The next relaxation time. Enter multiple tauk properties for each term on the series.	time units	none
fibrous	Enter 1 to indicate fiber direction is independent of time (or [math]\displaystyle{ E_A }[/math] and [math]\displaystyle{ \nu_A }[/math] are independent of time). Enter 0 to allow [math]\displaystyle{ n(t) }[/math] and [math]\displaystyle{ \ell(t) }[/math] to be entered and to depend on time.	dimensionless	1
TI Properties	Enter thermal expansion, solvent expansion, and poroelasticity properties as usual for transversely isotropic materials. When fibrous is 1, also enter EA and nuA.	varies	varies
(other)	Properties common to all materials	varies	varies

The material properties need to define time dependence of 3 properties (when fibrous is 1) or 5 properties (when fibrous is 0). The process for each one is to enter the long-term value first (GT0, A0, KT0, en0, ell0) and to follow each one by ntaus (only needed in XML files) and by one Pk and tauk for each term in the series.

When fibrous is 1, you enter EA and nuA. When fibrous is 0, those values are

      [math]\displaystyle{ \nu_A = {\ell_0\over 2K_{T0}} \qquad {\rm and} \qquad E_A = n_0 - 4K_{T0}}\nu_A^2 = n_0 - \ell_0^2 }[/math]

      [math]\displaystyle{ G_T = {E_T\over 2(1+\nu_T)} \qquad {\rm and} \qquad \frac{1}{K_T} = {1-\nu_T\over E_T} - {2\nu_A^2\over E_A} }[/math]

History Variables

This material tracks internal history variables (one for each relaxation time and each component of stress) for implementation of linear viscoelastic properties, but currently none of these internal variables are available for archiving.