Isotropic Phase Field Softening Material
Jump to navigation
Jump to search
Constitutive Law
This material implements phase field fracture model using the viscous regularization method described in Miehe [1] and extends it in a few areas.
(more description to follow)
Material Properties
The isotropic variational mechanics model using a single energy release rate that scales evolution of damage. The critical energy release rate is enter using the base material JIc property. The other needed material properties are as follows:
| Property | Description | Units | Default |
|---|---|---|---|
| (Isotropic Properties) | Enter all properties needed to define the underlying isotropic material response | varies | varies |
| ell | Length scale parameter used in variational fracture mechanics | length units | none |
| viscosity | Viscosity to use when solving coupled phase field evolution in a diffusion tasks | viscosity units | none |
| gd | Softening law with options 0 = quadratic, 1 = exponential, 2 = linear softening | none | 0 |
| garg | An optional argument for use within the softening law. If not provided, default values depend on gd and are 1, 3, and 4, for gd = 0, 1, or 2, respectively | none | varies |
| stability | A stability factor thought to stabilize post-failure analysis | none | 0 |
| partition | Chose the method used to partition energy into energy that causes fracture and energy that does not cause fracture. The options are 0 = using eigenstrain analysis and 1 = divide into pressure and deviatoric strains | none | 1 |
| (other) | Properties common to all materials | varies | varies |
The results in Miehe [1] correspond to gd = 1, garg = 1, and partition = 0. These choices give poor results in some problems. This material has extension that can explore different phase field options.
History Variables
This material stores several history variables that track the extent of the damage and evolution of the phase field:
- Maximum energy history term that provides source terms for phase field evolution
- Damage state equation to 0 if not failed and 1 if failure (i.e., phase value has reached 1)
- Current phase field value
- Change in phase field since the last time step. It is used in constitutive law modeled and is scaled by 0.5 when using USAVG method.