Isotropic Material

This material is a small strain, linear elastic material. The components stress are related to components of strain by

[math]\displaystyle{ \sigma_{ij} = \bigl(\lambda\varepsilon_{ii} - 3K(\alpha \Delta T+\beta c)\bigr)\delta_{ij} + 2G\varepsilon_{ij} }[/math]

where λ is the Lame, K is bulk modulus, α is thermal expansion coefficient, ΔT is temperature difference, β is solvent expansion coefficient, c is solvent concentration, and G is shear modulus. Two other isotropic material properties are modulus, E, and Poisson's ratio, ν.

Material Properties

Although an isotropic material can be defined any two of λ, K, G, E, and ν, the only properties allowed for defining this material are E and ν. Those two and other properties are:

<E>0.1</E> The material modulus (in MPa) <nu>0.33</nu> The material Poisson's ratio <alpha>60</alpha> The material thermal expansion coefficient (in ppm/C) <beta>60</beta> The material concentration expansion coefficient (in strain/wt fraction) <D>400</D> Diffusion constant (in mm2/sec). Only used when doing diffusion calculations. NairnMPM only. <kCond>400</kCond> Thermal conductivity (in W/(m-K)). Only used when doing conduction calculations. NairnMPM only. Other Properties See the properties common to all materials for NairnMPM only.

History Data

None