VisIt

VisIt is free and advanced software with many options for visualization, especially when doing 3D calculations.

Getting Started

This section gives the basic steps needed to start using VisIt to visualize material point method output from NairnMPM.

1. Download and Install VisIt. It is available for many platforms and can run in parallel. The recent Mac versions, however, do not appear to work as advertised.
2. Run someNairnMPM calculations. You have two options for visualizing results in ParaView:
   1. After a simulation is done, use the "Export Particle VTKs..." option to extract results of any simulation to particle VTK files. Include the data you want to visualize. it works best if you include "meansize" which means the simulation included "size" in the archived results. These VTK files can be used create particle plots.
   2. Include the VTKArchive Custom Task to save results as VTK legacy files. Save the quantities you might want to plot and one of them should be mass (because it is used in many plot options). These VTK files can be used to create grid plots.
3. To open either type of VTK files in VisIt, choose the "Open File..." command (or click the "Open" icon) and select a block of VTK legacy files. Those exported as particle VTKs will be in the the archived results folder for your simulation and will have the root name you choose when exporting the files. Those created by a VTKArchive Custom Task will also be in the archived results folder with the naming style "MPM_#.vtk" where "MPM" is the root name you used for the calculation's archived files and "#" is the step number. If you used VTKArchive Custom Task to archive results for a single material type, the fille name will change to "MPM_mat_#_#.vtk" where the first number ia a material number. VisIt will let you select such files as a block and will open them all at once. Alternatively, you can expand the block and select a single file. You need to open as a block to get movies of results. If asked, choose to open and use "Serial" or "Parallel" methods.

Once opened, you have many plotting options available. The available options will depend of if you opened particle VTK files or grid-based VTK files. The following sections gives to steps to get started with plotting. Once have one of these plots visible, you can explore all the VisIt options for more ways to visualize the results. You can browse the User Manual for help on other options.

Particle Plots in VisIt

By extracting particle data to VTK files (either using the "Export Particle VTKs..." option in NairnFEAMPM or in NairnFEAMPMViz or by running ExtractMPM on a command line), you can use VisIt to view particle-based plots.

1. Open the export=ed particle VTK files in VisIt (as described above)
2. Choose icon to add "Glyph" in the tool bar (it is also in the "Filters" menu along with many more options)
3. In the "Add" icon menu, choose scalar component to plot for the "Pseudocolor..." submenu (only scalar quantities are in the menu; see later for plotting vector or tensor quantities).
4. Choose "Pseudocolor..." from the "PlotAtts" menu and:
   1. Click on the "Geometry" Tab
   2. Set "Point Type" to box or sphere (others make less sense)
   3. Check "Scale point size by variable" and choose "meansize" from "Scalars" submenu in the button to right of the check box. Set the "Point size" to 2 (because archiveed mean size is particle radius). If you did not archive particle size and export it to the particle VTK files, the "meansize" will not be available. In this case, uncheck the "Scale point size by variable" box and set the "Point size" to half the grid size. This approach only works when all particle are the same size.
5. Once all settings are made, click "Draw" icon to get the plot. Once you have a plot, you can click and drag with mouse to change the viewing position.
6. Choose simulation result to plot from menu in second row of tool bars. (for [#Vector and Tensor Plotting|tensor or vector quantities]], choose the component to plot from the second menu).

Mesh Plots

By saving simulations results using VTKArchive Custom Task, you can get grid plot in ParaView. One type of mesh plot is to create contours based on one output variable and color the surface by another one.

1. Open the VTK files save by a VTKArchive Custom Task. If you did not include this custom task when running the simulation, you will have to add it and run again. If cannot be exported from prior simulations. Once opened, you should get a wire frame showing extent of the grid.
2. Choose icon to add a "Contour" in the tool bar (it is also in the "Filters" menu along with many more options)
3. In the "Contour Properties" window make the following settings
   1. Set "Contour By" to mass.
   2. In the isosurfaces section, set the contour value to some number less than the maximum mass. The optimal value will depend on the structure of your model. You need a lower number to visualize porous objects or a higher number for solid objects. You can also add several numbers to create contours at several values of mass.
4. Once all settings are made, click "Apply" to get the plot (often ParaView does nothing when you change something until you click "Apply"). Once you have a plot, you can click and drag with mouse to change the viewing position.
5. Choose simulation result to plot from menu in second row of tool bars. (for tensor or vector quantities, choose the component to plot from the second menu).

Vector and Tensor Plotting

Archived vectors will include all components of the vector and ParaView can view the magnitude or any single component for constructing graphics. Archived tensors will include all components of the tensor. In ParaView, the magnitude and components 0 through 8 of tensors will be listed. The numbers correspond to the following tensor components:

( xx   xy   xz )   ( 0  1  2 )
| yx   yy   yz | = | 3  4  5 |
( zx   zy   zz ) = ( 6  7  8 )

The magnitude appears to square all terms, add, and take the square root. In is generalize of vector length to a second-rank tensor.

You should have gotten a plot of two spheres which each particle plotted as a small sphere. You can explore all the ParaView options for ways to visualize the results. For example, you can color by any of the properties extracted to the file, create cropping planes, animate the results with the movie controls, or plot different style Glyphs at each material point.