Difference between revisions of "Isotropic, Hyperelastic-Plastic Mie-Grüneisen Material"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
== Material Properties == | == Material Properties == | ||
The Mie-Grüneisen equation of state properties and the hardening law properties are set with the following options: | |||
{| class="wikitable" | {| class="wikitable" | ||
| Line 9: | Line 11: | ||
! Property !! Description !! Units !! Default | ! Property !! Description !! Units !! Default | ||
|- | |- | ||
| | | C0 || The bulk wave speed || m/sec || 4004 | ||
|- | |- | ||
| gamma0 || The γ<sub>0</sub> parameter || none || 1.64 | |||
|- | |||
| S0 || The S<sub>0</sub> parameter || none || 1.35 | |||
|- | |||
| S1 || The S<sub>1</sub> parameter || none || 0 | |||
|- | |||
| S2 || The S<sub>2</sub> parameter || none || 0 | |||
|- | |||
| G || Low-strain shear modulus || MPa || none | |||
|- | |||
| Hardening || This command selects the [[Hardening Laws|hardening law]] by its name or number. It should be before entering any yielding properties. || none || none | |||
|- | |||
| (yield) || Enter all plasticity properties required by the selected [[Hardening Laws|hardening law]]. || varies || varies | |||
|- | |||
| [[Common Material Properties|(other)]] || All other properties are identical to the properties for an [[Isotropic Material|isotropic material]], except that only shear modulus, G, is used and thermal expansion coefficient, alpha, is ignored. || varies || varies | |||
|} | |} | ||
Revision as of 14:36, 31 December 2013
Constitutive Law
This MPM material is identical to an HEIsotropic material in that it uses a Mie-Grüneisen equation of state in the elastic regime. The elastic shear terms are handles like the Neohookean shear terms in the HEIsotropic material.
Material Properties
The Mie-Grüneisen equation of state properties and the hardening law properties are set with the following options:
| Property | Description | Units | Default |
|---|---|---|---|
| C0 | The bulk wave speed | m/sec | 4004 |
| gamma0 | The γ0 parameter | none | 1.64 |
| S0 | The S0 parameter | none | 1.35 |
| S1 | The S1 parameter | none | 0 |
| S2 | The S2 parameter | none | 0 |
| G | Low-strain shear modulus | MPa | none |
| Hardening | This command selects the hardening law by its name or number. It should be before entering any yielding properties. | none | none |
| (yield) | Enter all plasticity properties required by the selected hardening law. | varies | varies |
| (other) | All other properties are identical to the properties for an isotropic material, except that only shear modulus, G, is used and thermal expansion coefficient, alpha, is ignored. | varies | varies |
History Variables
None