Difference between revisions of "FEA Mesh Generation Commands"

Revision as of 09:50, 30 August 2013

The best way to generate an FEA mesh is to use Keypoint, Path, and Area commands. Advanced mesh options can be done with image files and shape commands.

Scripted Input Files

In scripted input files, you build the mesh by using multiple mesh generation commands. These commands are usually grouped together, but may be at various locations in the input file. For example, a simple 2D, rectangular mesh of width #length, height #height, and thickness #thick with #horiz elements in the horizontal direction and #vert elements in the vertical direction (where terms beginning in number signs are script variables) can be created with:

Area #matname$,#thick
  Path "Bottom",#horiz
    Keypoint "BotLeft",0,0
    Keypoint "BotRight",#length,0
  EndPath
  Path "Right",#vert
    Keypoints "BotRight"
    Keypoint "TopRight",#length,#height
  EndPath
  Path "Top",#horiz
    Keypoints "TopRight"
    Keypoint "TopLeft",0,#height
  EndPath
  Path "Left",#vert
    Keypoints "TopLeft","BotRIght"
  EndPath
EndArea
Resequence "BotRight"

Basic Commands

The fundamental commands for generating a mesh are

Area: Define an area for mesh generation.
Path: Define a path used in defining areas.
Paths: Add multiple defined paths to an area.
Keypoint: Define a keypoint used in defining paths
Keypoints: Add multiple defined keypoints to a path.

Mesh Attribute Commands

<a href="Origin.html">Origin</a>: Define coordinate system origin for entry of <a href="keypoint.html">Keypoints</a> using polar coordinates.
<a href="element.html">Element</a>: Define type of element to use in the mesh.
<a href="fliptriangles.html">FlipTriangles</a>: Select the direction of triangular elements in meshes that use those elements.
<a href="resequence.html">Resequence</a>: To turn on the option to resequence the nodes, which will minimize the bandwidth of the problem and speed the calculations.

Creating a Mesh Using Image and Shape Commands

<a href="bmpregion.html">BMPRegion</a> ... <a href="endregion.html">EndRegion</a>: Generate elements from an image in a BMP file.
<a href="hole.html">Hole</a> ... <a href="endhole.html">EndHole</a>: Remove elements using a series of shape commands.
<a href="oval.html">Oval</a>: Define oval to set element material type.
<a href="polypt.html">PolyPt</a>: Define polygon to set element material type
<a href="rect.html">Rect</a>: Define rectangle to set element material type.
<a href="region.html">Region</a> ... <a href="endregion.html">EndRegion</a>: Generate elements for a series of shape commands.

XML Input Files

In XML input files, all mesh generation commands must be within a single Mesh block:

<Mesh>
  <Keypoints>
    <pt x='0' y='0' id='lowerleft'/>
    <pt x='0' y='10' id='upperleft'/>
    <pt x='50' y='0' id='lowerright'/>
    <pt x='50' y='10' id='upperright'/>
  </Keypoints>

  <Path id="bottom" intervals='6' ratio='1'>
    <keypt id='lowerleft'/>
    <keypt id='lowerright'/>
  </Path>
  <Path id="right" intervals='3'>
    <keypt id='lowerright'/>
    <keypt id='upperright'/>
  </Path>
  <Path id="top" intervals='6'>
    <keypt id='upperright'/>
    <keypt id='upperleft'/>
  </Path>
  <Path id="left" intervals='3'>
    <keypt id='upperleft'/>
    <keypt id='lowerleft'/>
  </Path>

  <<a href="#Areas"><code>Area</code></a> mat="1" thick="10" type="4" flip="0" angle="0">
    <path id="bottom"/>
    <path id="right"/>
    <path id="top"/>
    <path id="left"/>
  </Area>
</Mesh>

<!-- image and shape methods to set element properties -->

<BMP name="MatImage.bmp" width="50" angles="MatAngles.bmp">
  <Origin x="0" y="0"/>
  <Intensity mat="2" imin="76" imax="255">
    <Thickness units="mm">1</Thickness>
  </Intensity>
  <Intensity mat="3" imin="1" imax="75">
    <Thickness units="mm">1</Thickness>
  </Intensity>
  <Intensity imin="0" imax="255" minAngle="0.000000" maxAngle="90.000000"/>
</BMP>

<Body mat='1' angle='0' thick='1'>
   <Oval units='mm' xmin='10' xmax='40' ymin='10' ymax='40'/>
   <Rect units='mm' xmin='10' xmax='40' ymin='10' ymax='40'/>     
</Body>

<Hole>
   <Rect xmin='20' xmax='30' ymin='20' ymax='30'/>     
</Hole>

Mesh Generation Commands

The fundamental XML commands for generating a mesh are:

Area: Define an area for mesh generation.
Path: Define a path used in defining areas.
Keypoints: Define a keypoint used in defining paths

Keypoints

The <Keypoints> section must come first. It can define any number of key points. Each subordinate <pt> command defines a key point, provides its x and y coordinates and gives it an id. The id's can be text or numbers and must all be unique among key points.

Paths

Following the <Keypoints>, there are a series of <Path> commands that link the key points into lines or arcs and define mesh information along those paths. Subordinate to each <Path> command are a series of <keypt> commands that list the key points that define the path. Use two key points to define a line or three key points to define an arc. Currently the path can only have two or three key points. The key points are selected by their id. The attributes for a <Path> command are:

id: An id for the path. The id's can be text or numbers and must be unique among all paths.
intervals: Number of elements along this path when it is meshed into an area.
ratio: Ratio of the size of the first element along the path to the last one. If ratio<0, then the absolute size of the first element on the path with be |ratio|. The default is 1.0 which gives equally sized elements.

BMP, Region, and Hole Commands

A powerful way to mesh complicated structures or composite materials with complicated morphologies is to do most of the work in <BMP> commands or using shapes in <Body> or <Hole> commands. The process is:

Create a standard mesh as described above. For sections of the mesh that will be set from a BMP file or from shapes, set the material attribute to 0.
One the <Mesh> section is done, use one or more interspersed <BMP>, <Body>, or <Hole> commands. They will map elements they cover currently with material 0 to the the material defined by the image or the region settings. The grid can be regular or irregular. The material will be selected from the image information at the centroid of the element; for shapes it will be set if the centroid of the element is in the shape. To resolve complicated structures, the grid has to be fine enough to resolve object details.
When the mesh is done, any elements initialized to material 0 but not assigned to a material by <BMP>, <Body>, or <Hole> commands will automatically be removed from the mesh. This feature allows calculations on materials with voids or irregular edges without needing to use <Area></a> commands to construct all details of the shape. If these removals cause the mesh to be partitioned into disconnected sections, however, the FEA analysis will fail. A good way to verify connectivity is to attempt to resequence the nodes

The image and shape commands are:

<a name="body"></a><BMP>: The details on the <BMP> command and the meaning of its attributes and subordinate commands are given <a href="definempm.html#BMPShape">here</a> (in the MPM documentation).
<a name="body"></a><Body>: Defines a block of material. All material points in the block will be assigned the same material number (mat, see <a href="definematl.html">Defining Materials</a>; numbers can be replaced by names using a matname attribute as explained <a href="definematl.html#usemats">here</a>), material angle (angle in degrees which is used for some <a href="definematl.html">anisotropic materials</a>; t can be entered as a number or as a <a href="function.html">user-defined function</a>), and thickness (thick in mm) A single <Body> for 2D FEA can contain any number of the <a href="definempm.html#2DShapes">2D shape commands</a>. The shapes can overlap; if they do the element material will be for the first shape command that intersects that elements centroid. If not specified angle will be zero and the thickness will be 1 mm.
<Hole>: Defines empty space within a body. A single <Hole> group for 2D FEA can contain any number of the <a href="definempm.html#2DShapes">2D shape commands</a>. Any subsequent <BMP> or <Body> structures that overlap the hole will not assign those elements.

@@ Line 52: / Line 52: @@
 == XML Input Files ==
-In <tt>XML</tt> input files, all [[Mesh Generation Commands]] must be within a single Mesh block:
+In <tt>XML</tt> input files, all [[#Mesh Generation Commands|mesh generation commands]] must be within a single Mesh block:
 <pre>